Repair Procedures: Inspection

AEB function ON/OFF switch was included to USM (User Setting Menu) and the state of the factory is ON.

When the IGN On, maintain ON condition by default. And does not reflect the driver settings when next IGN On.

If turned the ESC function Off, the AEB function is turned off.

• The ON/OFF for AEB is included in the USM (User Setting Menu) and the default is ON.
• While IGN is On, it stays at ON, however, the driver's settings do not last next time when IGN is newly On.
• When VDC is OFF, AEB is also turned OFF.