LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2021 >> Elantra SE >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Rear Suspension System - 2.0L (Except HEV) >> Rear Shock Absorber >> Repair Procedures >> Inspection >> Disposal

Repair Procedures: Inspection: Disposal

  1. Fully extend the shock absorber rod.
  2. Drill a hole to remove gas from the cylinder (A).
    G14607872Courtesy of HYUNDAI MOTOR AMERICA
    CAUTION:
    • The gases emitted are colorless, odorless, and harmless.
    • Be careful when drilling, as the drill chip may be blown.
scientia non olet · About LEMON Manuals