LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2021 >> Elantra SE >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 36 (Dual Clutch Transmission Diagnosis - 1.6L (Except HEV) (3 Of 3)) >> DTC P1921-77: Gear 2 System Referencing Failure >> DTC Information And Inspection >> DTC Detecting Condition

DTC Information And Inspection: DTC Detecting Condition

WARNING: This page is about a different variant/trim than selected.
Trouble Shooting Condition Possible Cause
DTC Strategy
  • Monitoring maximum length of left/right gear shift motor 2
  1. Faulty DCT
  2. Mechanical failure on gear 2 Shift direction
Enable Condition
  • Gear shift motor 2 hall sensor is normal when reference point is found during engine cranking
Threshold Value
  • Maximum motion of gear shift motor 2 is less than 19.4 mm or greater than 22 mm
Detecting Time
  • 3 times
Fail Safe
  • Drive at Odd gear (1/3/5/7)
scientia non olet · About LEMON Manuals