LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2021 >> Elantra SE >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 35 (Dual Clutch Transmission Diagnosis - 1.6L (Except HEV) (2 Of 3)) >> DTC P1904-64: Select 2 Solenoid Position Sensor Circuit >> DTC Information And Inspection >> DTC Detecting Condition

DTC Information And Inspection: DTC Detecting Condition

WARNING: This page is about a different variant/trim than selected.
Trouble Shooting Condition Possible Cause
DTC Strategy
  • Check the voltage
  1. Faulty gear actuator assembly
  2. Faulty select 2 position sensor circuit
  3. Faulty select 2 position sensor
Enable Condition
  • Battery voltage is higher than 10V
  • GA is in run mode
Threshold Value
  • Out of available range
Detecting Time
  • 4s
Fail Safe
  • Drive at Odd gear (1/3/5/7)
scientia non olet · About LEMON Manuals