| Main action |
- Monitoring voltage and current of motor circuit
|
- Faulty Motor
- Open circuit in motor circuit
- Faulty EPB motor driver system
- Defective EPB motor driver system
- Blown fuse
|
| Threshold value |
- When EPB motor operation, if the motor current is lower than the reference value for more than 0.5 second or
- When the state of the voltage across the motor is out of specific range for more than 1.5 seconds after 1 second elapsing from completion of operation of the EPB motor.
|
| Diagnosis time |
- While controlling: 500 milliseconds
- While not controlling: 1500 milliseconds
|
| MIL |
- EPB/AVH warning lamps are activated
|
| Reset condition |
- Turn ignition switch OFF and ON.
|