| Main action |
|
- Poor connector connection
- FCA (AEB/SCC) incorrectly occupy the CAN Bus line
- Defective wire
- Short circuit between CAN bus lines.
- Faulty FCA (AEB/SCC)
|
| Threshold value |
- When FCA (AEB) message's Alive counter does not increase more than 200 milliseconds
- A failure is detected when received FCA (AEB) message's checksum value and calculated checksum value is different for more than 200 milliseconds
|
| Diagnosis time |
|
| MIL |
|
| Reset condition |
- When the normal state is confirmed after ignition switch turned OFF and back ON.
|