| Main action |
- Monitor the reverse switch circuit
|
- Short or open in Reverse Gear switch circuit [A/T]
- Short or open in Back up light switch circuit [M/T]
|
| Threshold Value |
Case 1 |
- When Reverse switch signal is input for more than 1 minute while driving more than 60 km/h (37.2 MPH)
|
| Case 2 |
- During backward driving, reverse gear switch state is inactive for more than 1 minute
- When the reverse gear switch state change more than 80 times for 5 seconds
|
| MIL |
- DBC/AVH warning lamps are activated
|
| Reset condition |
Case 1 |
- Normal after ignition switch turned off and back on again and the state change of Reverse switch is not detected more than 3 seconds
|
| Case 2 |
|