LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2021 >> Elantra SE >> Repair and Diagnosis >> Brakes >> Anti-Lock Brakes >> Abs/Esp Diagnosis (1 Of 2) (Except HEV) >> DTC C1261-04: Steering Angle Sensor Not Calibrated >> DTC Information And Inspection >> DTC Detecting Condition

DTC Information And Inspection: DTC Detecting Condition

Trouble shooting Condition Possible cause
Main action
  • Monitor the calibration state of SAS
  1. Steering Angle Sensor is not calibrated
  2. Faulty SAS
  3. SAS power supply failure
Threshold value
  • A failure is detected when stored sensor calibration value is invalid. Or
  • The calibration of the corresponding sensor has not been executed.
Diagnosis time
  • 100 milliseconds
MIL
  • ESP (ESC) warning lamp is activated
Reset condition
  • After ignition switch turned OFF and ON, if SAS calibration signal is normal.
scientia non olet · About LEMON Manuals