LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2021 >> Elantra N Line, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (Intake And Exhaust System - 2.0L (Except HEV)) >> Muffler And Catalytic Converter >> Repair Procedures >> Removal and Installation >> Rear muffler

Rear muffler

WARNING: This page is about a different variant/trim than selected.
  1. Remove the rear muffler.

    Tightening torque: 

    39.2 - 58.8 N.m (4.0 - 6.0 kgf.m, 28.9 - 43.4 lb-ft)

    G14607302Courtesy of HYUNDAI MOTOR AMERICA
    NOTE:
    • When installing, replace with new gaskets.
  2. Install in the reverse order of removal.