LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2021 >> Elantra N Line, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 35 (Engine Control System Diagnosis - 2.0L (Except HEV) (4 Of 6)) >> DTC P061C-00: Internal Control Module Engine RPM Performance >> DTC Information And Inspection >> DTC Detecting Condition

DTC Information And Inspection: DTC Detecting Condition

WARNING: This page is about a different variant/trim than selected.
Item Detecting Condition Possible Cause
DTC Strategy
  • Level 2 monitoring (=Process monitoring)
  1. Poor connector connection
  2. Faulty PCM
Enable Condition
  • Engine speed during engine start is higher than 32 RPM
Threshold Value
  • Too high engine speed when ETC limp home active (Engine speed is higher than 1760 RPM)
Diagnostic Time
  • 0.48 seconds
MIL ON Condition
  • 1 driving cycle
scientia non olet · About LEMON Manuals