LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2021 >> Elantra N Line, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 35 (Engine Control System Diagnosis - 2.0L (Except HEV) (4 Of 6)) >> DTC P052A-00: Cold Start 'A' Camshaft Position Timing Over-Advanced (Bank 1 In-Cam) >> DTC Information And Inspection >> DTC Detecting Condition

DTC Information And Inspection: DTC Detecting Condition

WARNING: This page is about a different variant/trim than selected.
Item Detecting Condition Possible Cause
DTC Strategy
  • Intake VFS monitoring
  1. Poor connector connection
  2. Oil leak
  3. Engine oil contamination Vacuum leakage
  4. Faulty intake VFS
  5. Intake VFS filter contamination
  6. Faulty CVVT assembly (intake)
Enable Condition
  • Catalyst heating is active
Threshold Value
  • Deviation of target angle and actual angle is higher than 10°
Diagnostic Time
  • 5 seconds
MIL ON Condition
  • 2 Driving Cycles