DTC Information And Inspection: DTC Detecting Condition
WARNING: This page is about a different variant/trim than selected.
| Item |
Detecting Condition |
Possible Cause |
| DTC Strategy |
|
- Poor connector connection
- Intake system air leakage
- Throttle plate for carbon deposits
|
| Enable Condition |
- Vehicle speed is same as 0 km/h (0 mph)
- Acceleration pedal position is same as 0%
- Catalyst heating is active
|
| Threshold Value |
- Difference between the target engine speed and the actual engine speed is more than 100 RPM
- Difference between the actual engine speed and the target engine speed is more than 200 RPM
- Fuel cut-off during stand-still is more than 3times
|
| Diagnostic Time |
- 8 seconds (once per driving cycle)
|
| MIL ON Condition |
|