LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2021 >> Elantra N Line, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 34 (Engine Control System Diagnosis - 2.0L (Except HEV) (3 Of 6)) >> DTC P0341-00: Camshaft Position Sensor 'A'(Intake) Circuit Range/Performance (Bank 1) >> DTC Information And Inspection >> DTC Detecting Condition

DTC Information And Inspection: DTC Detecting Condition

WARNING: This page is about a different variant/trim than selected.
Item Detecting Condition Possible Cause
DTC Strategy
  • Sensor signal error occurs during one crank rotation
  1. Poor connector connection
  2. Short in harness
  3. Electrical noise
  4. Target wheel damage
  5. Faulty intake CMPS
Enable Condition
  • Engine synchronized
Threshold Value
  • Camshaft edge out of normal range
Diagnostic Time
  • 8 seconds
MIL ON Condition
  • 2 driving cycles
scientia non olet · About LEMON Manuals