LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2021 >> Elantra N Line, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 34 (Engine Control System Diagnosis - 2.0L (Except HEV) (3 Of 6)) >> DTC P0340-00: Camshaft Position Sensor 'A (Intake)' Circuit (Bank 1 Or Single Sensor) >> DTC Information And Inspection >> DTC Description

DTC Description

WARNING: This page is about a different variant/trim than selected.

The PCM monitors the inlet camshaft sensor signal transition position which must change only once per crankshaft revolution. If no camshaft signal is detected while crankshaft signal is detected, the PCM sets DTC P034000.

scientia non olet · About LEMON Manuals