LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2021 >> Elantra N Line, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 34 (Engine Control System Diagnosis - 2.0L (Except HEV) (3 Of 6)) >> DTC P0315-00: Crankshaft Position System Variation Not Learned >> DTC Information And Inspection >> Monitor Current Data

Monitor Current Data

WARNING: This page is about a different variant/trim than selected.
  1. Ignition "OFF".
  2. Connect GDS to Data Link Connector (DLC).
  3. Engine "ON".
  4. Warm up the engine to normal operating temperature.
  5. Monitor following parameters in "Current Data" with GDS.
G14609898Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals