LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2021 >> Elantra N Line, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 34 (Engine Control System Diagnosis - 2.0L (Except HEV) (3 Of 6)) >> DTC P0315-00: Crankshaft Position System Variation Not Learned >> DTC Information And Inspection >> DTC Detecting Condition

DTC Information And Inspection: DTC Detecting Condition

WARNING: This page is about a different variant/trim than selected.
Item Detecting Condition Possible Cause
DTC Strategy
  • Segment Time Adaptation Monitoring
  1. Poor Connector Connection
  2. Misadjusted crankshaft and camshaft pulley position
Enable Condition
  • Engine speed is between 1500 and 3500 RPM
  • No fault related to CKPS
Threshold Value
  • If the segment learning value exceeds the specified value
Diagnostic Time
  • 3 crank rotation
MIL ON Condition
  • No MIL On (DTC only)
scientia non olet · About LEMON Manuals