LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2021 >> Elantra N Line, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 23 (Engine Control/Fuel System - General Information - 2.0L (Except HEV)) >> Troubleshooting >> Basic Troubleshooting >> Basic Inspection Procedure >> Measuring Condition of Electronic Parts' Resistance

Measuring Condition of Electronic Parts' Resistance

WARNING: This page is about a different variant/trim than selected.

The measured resistance at high temperature after vehicle running may be high or low. So all resistance must be measured at ambient temperature (20°C, 68°F), unless stated otherwise.

NOTE:
  • The measured resistance in except for ambient temperature (20°C, 68°F) is reference value.
scientia non olet · About LEMON Manuals