LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2021 >> Elantra N Line, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 20 (Automatic Transaxle System Diagnosis - 2.0L (Except HEV)) >> DTC P0705-1C: Transmission Range Sensor Circuit Malfunction (PRNDL Input) >> DTC Information And Inspection >> DTC Detecting Condition

DTC Information And Inspection: DTC Detecting Condition

WARNING: This page is about a different variant/trim than selected.
Trouble shooting Prerequisite condition Possible Cause
Main action
  • Monitor the signal
  1. Poor contact of connector
  2. Inhibitor circuit power failure
  3. Faulty inhibitor switch
  4. Faulty PCM/TCM
Prerequisite condition
  • Turn ignition switch "ON"
  • Battery voltage is 10V or more
Threshold Value
  • Inhibitor switch power circuit voltage is less than 4.5V or higher than 5.5V
Detecting Time
  • 0.4 sec
MIL ON Condition
  • 2 driving cycles