LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2021 >> Elantra N Line, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 20 (Automatic Transaxle System Diagnosis - 2.0L (Except HEV)) >> DTC P0601-00: Internal Control Module Memory Check Sum Error >> DTC Information And Inspection >> DTC Detecting Condition

DTC Information And Inspection: DTC Detecting Condition

WARNING: This page is about a different variant/trim than selected.
Trouble shooting Prerequisite condition Possible Cause
Main action
  • Monitor the internal checksum
  1. Faulty PCM
Prerequisite condition
  • Turn ignition switch "ON"
  • Battery voltage: 10V or more
Threshold Value
  • Checksum errors or PCM malfunction
Detecting Time
  • 1 time
MIL ON Condition
  • 1 driving cycle
Fail safe
  • Solenoid power "OFF", Learning should not be performed, Lower engine torque, Control Cooling FAN
scientia non olet · About LEMON Manuals