LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2021 >> Elantra N Line, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 18 (Engine Control System - 2.0L (Except HEV)) >> Variable Intake Solenoid (VIS) Valve >> Repair Procedures >> Inspection

Repair Procedures: Inspection

WARNING: This page is about a different variant/trim than selected.
  1. Turn the ignition switch OFF.
  2. Disconnect the VIS valve connector.
  3. Measure resistance between VIS valve terminals 1 and 2.

    Specification:  30.0 - 35.0Ω [20°C (68°F)]

scientia non olet · About LEMON Manuals