LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2021 >> Elantra N Line, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 18 (Engine Control System - 2.0L (Except HEV)) >> Thermal Management Module (TMM) Motor >> Repair Procedures >> Removal and Installation

Removal and Installation

WARNING: This page is about a different variant/trim than selected.
  1. Remove the Integrated Thermal Management Module (ITM).

    (Refer to Engine Mechanical System - "INTEGRATED THERMAL MANAGEMENT MODULE (ITM) ")

    NOTE:
    • ITM Motor cannot be replaced on its own. it should be replaced with the ITM.
  2. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals