LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2021 >> Elantra N Line, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 18 (Engine Control System - 2.0L (Except HEV)) >> Thermal Management Module (TMM) Motor >> Repair Procedures >> Inspection

Repair Procedures: Inspection

WARNING: This page is about a different variant/trim than selected.
  1. Turn the ignition switch OFF.
  2. Connect the diagnostic tool to Data Link Connector (DLC).
  3. Turn the ignition switch ON.
  4. Select "Vehicle, Model year, Engine, System".
  5. Connect a diagnostic tool and then operate the integrated thermal management module (ITM).
  6. Determine if the ITM is normal.
  7. If DTC code occurred, refer to the ENGINE CONTROL SYSTEM (2.0L) DTC information.
scientia non olet · About LEMON Manuals