LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2021 >> Elantra N Line, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 18 (Engine Control System - 2.0L (Except HEV)) >> Manifold Absolute Pressure Sensor (MAPS) >> Repair Procedures >> Inspection

Repair Procedures: Inspection

WARNING: This page is about a different variant/trim than selected.
  1. Connect the diagnostic tool on the Data Link Connector (DLC).
  2. Measure the output voltage of the MAPS at idle and IG ON.
    Condition Output Voltage (V)
    IG ON 3.9 - 4.1
    Idle 0.7 - 1.7