Check OCV
- Connect GDS to Data Link Connector (DLC).
- Turn the ignition switch "ON" and engine OFF.
- Perform "Actuation Test" for OCV.
- Does the OCV work normally? (Check clicking sound)
YES
- Replace the CVVT with an usable one and check for proper operation. If the problem is corrected, replace the CVVT and then go to "VERIFICATION OF VEHICLE REPAIR ".
NO
- Replace the OCV with an usable one and check for proper operation. If the problem is corrected, replace the OCV and then go to "VERIFICATION OF VEHICLE REPAIR ".