LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2021 >> Accent SEL >> Repair and Diagnosis (Single Page) >> Brakes >> Anti-Lock Brakes >> Anti-Lock Brake System (Abs) >> Troubleshooting >> Even After The Engine Is Started, The ABS Warning Lamp Remains ON >> Inspection procedures >> Check DTC Output

Check DTC Output

  1. Connect the GDS to the 16P data link connector located behind the driver's side kick panel.
  2. Check the DTC output using GDS.
  3. Is DTC output?

    YES 

    • Perform the DTC troubleshooting procedure (Refer to DTC troubleshooting).

    NO 

    • Check the CAN circuit resistance for ABS warning lamp.
scientia non olet · About LEMON Manuals