LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2021 >> Accent SEL >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Interior/Illumination Lights >> Lighting System >> Head Lamps >> Repair Procedures >> Replacement >> Static bending light (SBL)

Static bending light (SBL)

  1. Turn the head lamp switch off.
  2. Disconnect the power connector from the lamp.
  3. Remove the dust cap (A) after turning the dust cap counterclockwise.
    G14078889Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the static bending light bulb (A) after disconnecting the connector (B).
    G14078890Courtesy of HYUNDAI MOTOR AMERICA
  5. Installation is the reverse of removal.
scientia non olet · About LEMON Manuals