LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2021 >> Accent SEL >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Autonomous Emergency Braking System Diagnosis >> DTC C1613-83: CAN Signal Error EMS - Checksum >> Wiring Inspection >> C-CAN Communication Line Inspection >> Check Short to Battery in CAN Communication Line

Check Short to Battery in CAN Communication Line

  1. Turn the Ignition switch 'OFF'.
  2. Connect all related module connectors.
  3. Turn the Ignition switch 'ON'.
  4. Measure voltage between C-CAN High terminal of AEB (SCC) Module harness connector and chassis ground.
  5. Measure voltage between C-CAN Low terminal of AEB (SCC) Module harness connector and chassis ground.

Specification:  Below 5V

scientia non olet · About LEMON Manuals