DTC Information And Inspection: DTC Detecting Condition

WARNING: This page is about a different variant/trim than selected.

Troubleshooting	Condition	Possible Cause
Main Action	Monitor the motor piston position	Faulty Motor Motor position sensor calibration is not done
Threshold Value	A failure is detected when motor position sensor calibration is not done
MIL	ABS/ESC/IEB/RBS/DBC/AVH warning lamps are activated
Reset Condition	DTC is cleared and W/Lamp is off after calibration is done

NOTE: * IEBM (Integrated Electric Brake Module: ESP Control Module)