LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2020 >> Sonata SEL >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 31 (Abs/ESC Diagnosis (HEV) (2 Of 2)) >> DTC C2404-28: Servo Motor Circuit >> DTC Information And Inspection >> DTC Detecting Condition

DTC Information And Inspection: DTC Detecting Condition

WARNING: This page is about a different variant/trim than selected.
Troubleshooting Condition Possible Cause
Main Action
  • Monitor the motor phase current
  1. Poor connector connection
  2. Faulty IEBM
  3. Faulty Motor
Threshold Value
  • When Motor phase current is greater than 120A for more than 1 second
  • When Motor phase current is greater than 150A for one shot
MIL
  • ABS/ESC/IEB/RBS/DBC/AVH warning lamps are activated
Reset Condition
  • When Motor is normally initialized/origin set, after ignition switch turned OFF and back ON
NOTE: * IEBM (Integrated Electric Brake Module: ESP Control Module)