LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2020 >> Sonata SEL >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 31 (Abs/ESC Diagnosis (HEV) (2 Of 2)) >> DTC C1839-83: CAN Signal Error RSPA >> DTC Information And Inspection >> DTC Detecting Condition

DTC Information And Inspection: DTC Detecting Condition

WARNING: This page is about a different variant/trim than selected.
Troubleshooting Condition Possible Cause
Main Action
  • Monitor CAN message
  1. Open or short in CAN lines
  2. Damaged or poor connector connection
  3. Faulty RSPA
  4. Specification setting error
Threshold Value  
  • When received "Checksum" signal is different with calculated "Checksum" for more than specific time
  • Specific time: In control = 200 milliseconds

    Non control = 500 milliseconds
MIL
  • No MIL ON
Reset Condition
  • When normal CAN signal is received for more than 500 milliseconds after ignition is turned OFF and ON again
NOTE: * IEBM (Integrated Electric Brake Module: ESP Control Module)
scientia non olet · About LEMON Manuals