LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2020 >> Sonata SEL >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 31 (Abs/ESC Diagnosis (HEV) (2 Of 2)) >> DTC C1650-08: CAN Signal Error SCC >> DTC Information And Inspection >> DTC Detecting Condition

DTC Information And Inspection: DTC Detecting Condition

WARNING: This page is about a different variant/trim than selected.
Troubleshooting Condition Possible Cause
Main Action
  • Monitor the CAN message
  1. Open or short in CAN lines
  2. Poor connector connection
  3. Other ECUs incorrectly occupy the CAN Bus line
  4. Faulty SCC
  5. Incorrect Controller's version
Threshold Value  
  • In case that invalid SCC message is received continuously for more than specific times
  • Specific time: In control = 500 milliseconds

    Non control = 1, 500 milliseconds
MIL
  • No MIL ON
Reset Condition
  • When normal CAN signal is received for more than 500 milliseconds after ignition is turned OFF and ON again
NOTE: * IEBM (Integrated Electric Brake Module: ESP Control Module)
scientia non olet · About LEMON Manuals