LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2020 >> Sonata SEL >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 30 (Abs/ESC Diagnosis (HEV) (1 Of 2)) >> DTC C1285-04: Uncalibrated Ax Signal >> DTC Information And Inspection >> DTC Detecting Condition

DTC Information And Inspection: DTC Detecting Condition

WARNING: This page is about a different variant/trim than selected.
Troubleshooting Condition Possible Cause
Main Action
  • Monitor the calibration state of the sensor
  1. Longitudinal G sensor is not calibrated
  2. Faulty G sensor
  3. Controller power supply failure
  4. Faulty IEBM
Threshold Value
  • A failure is detected when calibration of the corresponding sensor has not been performed
  • DTC is cleared and warning lamp is 'OFF' after calibration is done
MIL
  • AVH warning lamp are activated
Reset Condition
  • The warning lamps and DTC are cleared if Calibration is done
NOTE: * IEBM (Integrated Electric Brake Module: ESP Control Module)