LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2020 >> Sonata SEL >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 13 (Engine Control System - 1.6L (Except HEV)) >> Thermal Management Module (TMM) Motor >> Repair Procedures >> Inspection

Repair Procedures: Inspection

WARNING: This page is about a different variant/trim than selected.
  1. Turn the ignition switch OFF.
  2. Connect the diagnostic tool to data link connector (DLC).
  3. Turn the ignition switch ON.
  4. Select "Vehicle, Model Year, Engine, System".
  5. Connect a diagnostic tool and then operate the integrated thermal management motor (ITM).
  6. Confirm the Integrated thermal management motor (ITM) proper operation.
  7. When the DTC occur, refer to the DTC guide.
scientia non olet · About LEMON Manuals