LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2020 >> Sonata SEL >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brake System (Except HEV) >> Master Cylinder >> Repair Procedures >> Installation

Repair Procedures: Installation

  1. To install, reverse the removal procedure.
    NOTE:
    • Before installing the pin, apply the grease to the joint pin.
    • Use a new snap pin whenever installing.
  2. After installation, bleed the brake system.

    (Refer to BRAKE BLEEDING PROCEDURES Brake System - "Brake Bleeding Procedures")

  3. Check the brake oil leakage and pedal operating condition.
scientia non olet · About LEMON Manuals