LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2020 >> Sonata SEL >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brake System (Except HEV) >> Brake Pad >> Repair Procedures >> Inspection >> Rear Brake Pad Check

Rear Brake Pad Check

  1. Check the pad wear. Measure the pad thickness and replace it, if it is less than the specified value.

    Pad thickness 

    • Standard: 10 mm (0.39 in)
    • Service Limit: 2.0 mm (0.78 in)
  2. Check the damage of pad, backing metal and contamination with grease.
scientia non olet · About LEMON Manuals