| Main action |
- Monitor the voltage and current of motor circuit
|
- Faulty Motor
- Short to ground in motor circuit
- Faulty ESP (ESC)
- Defective EPB motor driver system
- Blown fuse
|
| Threshold value |
- When the state of the voltage across the motor is less than 0.5 V for more than 1.5 seconds after 1 second elapsing from completion of operation of the EPB motor.
|
| Diagnosis time |
|
| MIL |
- EPB/AVH warning lamps are activated. EBD/ABS/ESP (ESC) warning lamps are not activated.
|
| Reset condition |
- Turn ignition switch OFF and ON.
|