| Main action |
- Monitoring the motor rotation time and operating current
|
- Damaged or poor connector connection
- Excessive parking brake shoe gap
- Over wear of parking brake shoes pads
- Rear Brake Pad Overheating
- Vehicle overweight
- Excessive slope of road surface (over 30%)
- Faulty actuator/wheel sensor
|
| Threshold value |
- When the EPB is engaged condition, if the wheel speed/wheel pulse occurs more than a certain time and the re-clamp operates more than 3 times.
|
| Diagnosis time |
|
| MIL |
- EPB warning lamp is activated.
- EBD/ABS/ESP (ESC)/AVH/EPB warning lamps are not activated.
|
| Reset condition |
- Turn ignition switch OFF and ON.
|