Repair Procedures: Replacement
CAUTION:
- When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.
- Use a plastic panel removal tool to remove interior trim pieces without marring the surface.
- Put on gloves to prevent hand injuries.
- Remove the rear door body side weatherstrip.
(Refer to Rear Door - "REAR DOOR SIDE WEATHERSTRIP ")
- Remove the rear seat back assembly.
(Refer to Rear Seat - "REAR SEAT ASSEMBLY ")
- Using a flat-tip screwdriver and remove the rear pillar trim (A).
- To install, reverse the removal procedure.
Information
- Replace any damaged clips.