DTC Setting Condition

Trouble Shooting		Condition	Possible Cause
Main Action		Monitor the data coming from a transponder	Faulty transponder
Threshold Value	Case1	Launch the antenna → IMMO → sends it to the transponder If the transponder fails to receive the serial number more than 5 consecutive times, repeat the procedure and store the DTC.
Threshold Value	Case2	Launch the antenna → IMMO → sends it to the transponder If the transponder receives 2 serial numbers and values, the data can be duplicate and the IMMO software determines that a transponder is missing. Repeat the procedure for 5 consecutive times and store the DTC.
Diagnostic Time		Immediately
DTC Clearing		Clear the DTC using GDS

NOTE: IMMOBILIZER*: "IBU"

DTC also shows up when 2 transponders are stuck close near the Antenna Coil