LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Tucson Sport, 4WD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 39 (Cylinder Head Assembly - 1.6L) >> Cylinder Head >> Repair Procedures >> Disassembly

Repair Procedures: Disassembly

WARNING: This page is about a different variant/trim than selected.
NOTE:
  • Identify MLA (Mechanical lash adjuster), valves, valve springs as they are removed so that each item can be reinstalled in its original position.
  1. Remove the MLAs (A).
    CAUTION:
    • When removing MLAs, mark all the MLAs for their rearrangement.
    G12608670Courtesy of HYUNDAI MOTOR AMERICA
  2. Remove the valves.
    1. Using the SST (09222-3K000, 09222-3K100), compress the valve spring and remove the retainer lock.
      G12608671Courtesy of HYUNDAI MOTOR AMERICA
    2. Remove the spring retainer.
    3. Remove the spring retainer.
    4. Remove the valve.
    5. Remove the valve stem seal.
    6. Using a magnetic pickup tool, remove the spring seat.
      CAUTION:
      • Do not reuse the valve stem seals.
scientia non olet · About LEMON Manuals