LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Tucson Sport, 4WD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 34 (Automatic Transaxle System - General Information - 2.0L) >> Troubleshooting >> Self-diagnosis >> Inspection Procedure (Using the GDS)

Inspection Procedure (Using the GDS)

WARNING: This page is about a different variant/trim than selected.
  1. Turn OFF the ignition switch.
  2. Connect the GDS to the data link connector on the lower crash pad.
  3. Turn ON the ignition switch.
  4. Use the GDS to check the diagnostic trouble code.
  5. Repair the faulty part from the diagnosis chart.
  6. Erase the diagnostic trouble code.
  7. Disconnect the GDS.
scientia non olet · About LEMON Manuals