Section 34 (Automatic Transaxle System - General Information - 2.0L): Specifications: Notes
WARNING: This page is about a different variant/trim than selected.
AUTOMATIC TRANSAXLE SYSTEM SPECIFICATIONS
| Item | Specifications | ||
|---|---|---|---|
| Engine type | Gasoline 2.0 GDI | ||
| Transaxle type | A6MF1 | A6MF1-1 | |
| Drive system | 4WD | 2WD | |
| Gear ratio | 1st | 4.612 | 4.440 |
| 2nd | 2.575 | 2.726 | |
| 3rd | 1.772 | 1.834 | |
| 4th | 1.369 | 1.392 | |
| 5th | 1.000 | 1.000 | |
| 6th | 0.778 | 0.774 | |
| Reverse | 3.500 | 3.440 | |
| Final gear ratio | 3.648 | 3.510 | |
| Torque converter type | 3-element, 1-stage, 2-phase type | ||
| Torque converter size | Ø236 mm (9.291 in.) | ||
| Oil pump system | Mechanical internal gear pump | ||
| Friction elements | Clutch: 2EA | ||
| Brake: 3EA | |||
| OWC: 1EA | |||
| Planetary gear | 3EA | ||
| Fluid pressure balance piston | 2EA | ||
| Accumulator | 4EA | ||
| Solenoid valve | 8EA (VFS: 6EA, ON/OFF: 2EA) | ||
| Shift lever position | 4 Range (P, R, N, D) | ||
| Oil filter | 1EA | ||
VFS: Variable Force Solenoid