LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Tucson Sport, 4WD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 28 (Engine Control System - 2.0L) >> Heated Oxygen Sensor (HO2S) >> Repair Procedures >> Inspection

Repair Procedures: Inspection

WARNING: This page is about a different variant/trim than selected.
  1. Turn the ignition switch OFF
  2. Disconnect the HO2S connector
  3. Measure resistance between the HO2S terminals 2 and 5 [B1/S1]
  4. Measure resistance between the HO2S terminals 3 and 4 [B1/S2]
  5. Check that the resistance is within the specification.

    Specification: Refer to " SPECIFICATION  " 

scientia non olet · About LEMON Manuals