LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Tucson Sport, 4WD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 28 (Engine Control System - 2.0L) >> Fuel Pressure Control Valve (FPCV) >> Repair Procedures >> Inspection

Repair Procedures: Inspection

WARNING: This page is about a different variant/trim than selected.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable
  2. Disconnect the fuel pressure regulator valve connector
  3. Measure resistance between the fuel pressure regulator valve terminals 1 and 2
  4. Check that the resistance is within the specification.

    Specification: Refer to " SPECIFICATION  " 

scientia non olet · About LEMON Manuals