LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Tucson Sport, 4WD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 16 (Engine Control System - 1.6L) >> Electric WGT Control Actuator >> Repair Procedures >> Inspection >> [Position Sensor]

[Position Sensor]

WARNING: This page is about a different variant/trim than selected.
  1. Turn ignition switch OFF.
  2. Connect the GDS to the data link connector (DLC).
  3. Check the output voltage at each position of the EWGA position sensor on current data item within the specification.

    Specification:  Refer to "Specification "

scientia non olet · About LEMON Manuals