LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Tucson Sport, 4WD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 11 (Timing System - 1.6L) >> Front Oil Seal >> Repair Procedures >> Removal and Installation

Removal and Installation

WARNING: This page is about a different variant/trim than selected.
  1. Crankshaft damper pulley.

    (Refer to Timing System - "DAMPER PULLEY ")

  2. Remove the front oil seal.
    NOTE:
    • Using the SST (09455-21200), reassemble the timing chain cover oil seal.
      G12608561Courtesy of HYUNDAI MOTOR AMERICA
  3. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals