Main Harness Circuit Inspection
| Item | Normal value | Prerequisite condition | Probe (+) | Probe (-) |
|---|---|---|---|---|
| Main harness Circuit Inspection (V) | Battery Voltage |
|
Airbag warning lamp terminal of the Cluster harness connector | Chassis ground |
- Is parameter displayed within specifications
YES
- Check warning lamp and connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage. Repair or replace as necessary and then go to "VERIFICATION OF VEHICLE REPAIR " procedure.
NO
- Check airbag fuse, junction block, Warning Lamp, harness between junction block and SRSCM.
Repair as necessary and go to "VERIFICATION OF VEHICLE REPAIR " procedure.