LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Kona Limited, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (Fuel Delivery System - 2.0L) >> Filler-Neck Assembly >> Repair Procedures >> Installation

Repair Procedures: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Installation is reverse of removal.

    Filler-neck assembly bracket installation bolt: 

    7.8 - 11.8 N.m (0.8 - 1.2 kgf.m, 5.8 - 8.7 lb-ft)

scientia non olet · About LEMON Manuals