Selection Of Engine Oil

WARNING: This page is about a different variant/trim than selected.

Specifications:

5W-20/API SM& ILSAC GF-4 (or above)/ACEA A5 (or above)

Information

API SL, ILSAC GF-3, ACEA A3 Class engine oil can be used if the recommended engine oil is not available.

Allowed SAE Viscosity

Courtesy of HYUNDAI MOTOR AMERICA

NOTE:

For best performance and maximum protection of all types of operation, select only those lubricants which:
1. Satisfy the requirement of the ILSAC (API) or ACEA classification.
2. Have proper SAE grade number for expected ambient temperature range.
3. Lubricants that do not have both an SAE grade number and ILSAC (API) or ACEA service classification on the container should not be used.