LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Kona Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 96 (Abs/ESC Diagnosis (2 Of 2)) >> DTC C2419-77: Motor Stall - RH >> DTC Information >> DTC Detecting Condition

DTC Information: DTC Detecting Condition

WARNING: This page is about a different car, the 2021 Kia Seltos. However, it is still accessible from the selected car via links, so may be relevant.
Item Detecting Condition Possible Cause
DTC Strategy
  • Monitoring voltage and current of motor circuit
  • Poor connector connection
  • Faulty EPB
Enable Condition
  • Normal battery voltage (9 to 16V)
Threshold Value
  • When a clamping load exceeding a certain level occur but the target current can not be reached within 3s after the load is generated (motor current is greater than 6A)
Warning Lamp
  • EPB, AVH
Disable Condition
  • When the ignition switch turns off and then on
scientia non olet · About LEMON Manuals